Mini Excavator 1.1 tons, with cab, 11 HP Kubota Engine, RIPPA R10 ECO

The RIPPA R10 ECO mini excavator is the most compact machine in the RIPPA lineup, built for excavation work in small yards, gardens, or extremely tight spaces, where no other machine would fit. The hydraulic retractable tracks adjust in seconds from 900mm to 1200mm with a single lever, allowing passage through narrow passages and, when needed, a wider stance for stability. It is powered by a Kubota Z482 engine, with an output of 8.2kW / 11HP, known for low fuel consumption and quiet operation, making it ideal for residential areas.

The R10 ECO delivers solid performance for its size: a maximum digging depth of 1833mm, a maximum digging radius of 3233mm, and a dumping height of 2247mm, enough for most residential or gardening jobs – digging a swimming pool, repairing a driveway, digging drainage ditches, stump removal, tree planting, snow removal, or land leveling. The gear pump, with a flow rate of 18 L/min, supported by a simple and reliable mechanical valve with a low failure rate, provides stable performance and low long-term maintenance costs.
 

Key Advantages

The control levers are positioned on both sides of the seat, allowing a relaxed working posture and excellent forward visibility, while the seat is ergonomically adjustable to reduce fatigue over long workdays. The boom cylinder allows the bucket to scoop up large rocks and concrete blocks and load them onto a dump truck without worrying about damaging the boom cylinder, thanks to the cylinder guard plate. The foot pedal is set to facilitate the side swing and extension of the excavator, freeing the driver's hands and improving work efficiency. The boom's side-swing structure allows digging near walls and in narrow spaces, with a swing angle of 47° to the right and 74° to the left.

The bulldozer blade is made of high-strength steel, resistant to wear and impact, reinforced with ribs and fitted with oil injection holes at the joints, with quick-fold adjustment via a simple pin pull. The motor and reducer are integrated into a compact design, making the structure more durable than exposed-component alternatives. The machine also includes a four-way high-pressure oil pipe for auxiliary equipment, a power switch to cut power supply during idle periods (reducing energy waste and operating costs), a dashboard for real-time monitoring of the machine's status, and centralized action buttons for simple operation.
 

Cab and Operator Comfort

The windshield can be flipped up for natural ventilation in hot weather and is easy to clean, while the wipers with washer fluid maintain good visibility regardless of weather conditions. The fresh air system sustainably introduces outside air to improve circulation in the cab, while the sun visor effectively blocks strong direct sunlight for better visibility. The cab is fitted with a four-post front protective net, which blocks flying stones, branches, and other debris, protecting both the glass and the operator. The reversing camera displays the area behind the machine in real time, reducing blind spots and making reversing safer. The cab also includes a heater for cold days and a fan for warm days, while the plastic roof cover offers a more refined look with better waterproofing and corrosion resistance compared to steel canopy variants.

Easy Maintenance

The rear hood opens wide for quick access to the engine, and the rear-opening operator seat mounted on the hood can be flipped up to reveal a large portion of the engine for easier access to components. A manually openable cover is specially set at the foot pedal, making it convenient to check the oil circuit and lines for maintenance and inspection work. The dedicated track-tensioning maintenance port, featuring a metal enclosed cover design, allows quick access to the tensioning cylinder and grease fittings without disassembling the tracks or large protective plates, significantly shortening repair time.
 

Technical Specifications

Basic parameters:

• Operating weight: 1115kg
• Bucket capacity: 0.014m³
• Travel speed: 0-1.5 km/h
• Gradeability: 30%
• Ground pressure: 25.53kPa
• Maximum digging force: 9.2kN
• Maximum digging radius: 3233mm
• Maximum digging depth: 1833mm
• Maximum digging height: 3021mm
• Maximum dumping height: 2247mm
• Maximum deflection angle: 121°
• Track extension range: 900-1200mm

Body:

• Transport length: 2430mm
• Transport width: 912mm
• Transport height: 2201mm
• Counterweight ground clearance: 361mm
• Bucket width: 300mm
• Boom length: 1477mm
• Arm length: 800mm
• Bulldozer blade width: 912-1212mm

Engine:

• Brand and model: Kubota Z482
• Maximum power: 8.2kW / 11HP
• Maximum speed: 3000rpm
• Displacement: 0.479L
• Number of cylinders: 2
• Cooling: water-cooled
• Engine oil change amount: 1.5L
• Fuel: Diesel
• Fuel grade: 0/-10
• Theoretical fuel consumption: 0.8-1.2 L/h

Hydraulic system:

• Main pump type: gear pump / 306
• Main pump maximum flow: 18 L/min
• Multi-way valve: 2+2+5 way
• Rated pressure: 17MPa
• Travel hydraulic motor type: WDM-300
• Slewing hydraulic motor type: BM2-315

✅ Service guaranteed
✅ Spare parts available
✅ Shipping included
 

Uneltisimo.ro – RIPPA Equipment Importer in Romania