Tractor Arm Flail Mower, 125 cm, PTO Connection, Jansen AGF-125 Light

The Jansen® AGF-125 Light is a lightweight, side-shifting, and angle-adjustable slope mulcher for tractors 24 PS and up. It is ideal for users who need a compact and maneuverable mulcher for smaller tractors.

Thanks to its lightweight design, the AGF-125 Light is easy to handle and versatile — for example, for maintaining meadows, ditches, slopes, field edges, and hard-to-reach areas.
 

Key Benefits:

• Lightweight design for smaller tractors
• Suitable for tractors with 24 PS or more
• Can be shifted sideways to the right in the direction of travel
• Angle-adjustable from approx. +90° to -55°
• Floating position thanks to a shut-off valve
• 20 hammer blades, each weighing approx. 0.4 kg
• Trailing roller for even ground contact
• Slats / protective screens against stone ejection
• PTO shaft included

Flexible in use – can be shifted laterally and angled
Thanks to the lateral offset and angle adjustment, you can reach areas that are difficult to work with a conventional rear mulcher. The AGF-125 Light is therefore particularly suitable for ditches, riverbanks, field edges, earthen embankments, and slopes. The mulcher can be shifted to the right in the direction of travel and angled up and down. The adjustment range is approximately +90° to -55°.
 

Drive and Adjustment
The drive is provided by the PTO shaft included in the scope of delivery, operating at 540 rpm. For hydraulic adjustment of offset and tilt, 2 double-acting hydraulic connections are required on the tractor. When using the optionally available add-on kit, only 1 double-acting connection and a 12-volt electrical connection are required. The connector is not included in the scope of delivery.
 

Clean mulching results with low power requirements
The cutting height can be adjusted using the side-mounted skids and the sturdy trailing roller. The 20 hammer flails, each weighing approx. 0.4 kg, reliably shred grass, weeds, and light brush. Thanks to its comparatively low power requirements, the AGF-125 Light is well-suited for smaller tractors.
 

Safety and Features
The rear roller supports smooth ground tracking and ensures a clean cut. Front vanes reduce the escape of clippings and stones during operation.

• Trailing roller for clean ground tracking
• Front vanes to prevent material ejection
• Shut-off valve for float position
• Side skids for adjusting cutting height

Technical Specifications:

• Mowing width: 1,250 mm
• Weight: 357 kg
• Tilt angle: approx. +90° to -55°
• Blade type: approx. 0.4 kg hammer blades
• PTO: included
• RPM: 540
• Drive: 3 V-belts
• Hitch: Three-point, Cat. I or higher
• Tractor power: min. 24 PS
• Dimensions when assembled: approx. 1,350 x 735 x 1,500 mm
• Dimensions including packaging: approx. 800 x 1,450 x 820 mm
• Weight with packaging: approx. 405 kg