Delivery date: Monday, 15.02.2027
The FEHRI Profi 2.0 hydraulic forestry mulcher is a tractor attachment designed for heavy-duty clearing, woody vegetation shredding and stump grinding. Unlike classic PTO-driven models, this one is driven hydraulically by a 60 cm³ axial piston motor — no PTO shaft, no driveshaft, no angle limitations. It mounts on the front or rear of the tractor via Cat. I or Cat. II linkage and requires a hydraulic pump delivering 180 L/min at 300 bar.
Drive through the hydraulic axial motor and 3 trapezoidal belts 17x1075 transmits power evenly to the rotor without jolting. The Ø193x6.3 mm rotor is equipped with Ø60 mm pendulum ball bearings, mounted externally for easy maintenance access. The FEHRI 40 hard metal carbide blades with Ø27 mm diameter are reusable up to 3 times depending on workload — long-term operating costs are low.
The robust steel sheet housing is protected with rear guard chains. Ground contact skids and a deflector on the belt guard protect the implement on contact with the ground. The mounting flap is hydraulic and the support stand ensures stability during coupling and decoupling.
Shreds brush, woody vegetation and stumps up to 20 cm in diameter depending on material consistency. Can be used front or rear, with rotor direction adaptable to working conditions.
| Specification | Value |
|---|---|
| General | |
| Model | Multihäcksler Profi 2.0 |
| Product code | 0172-1400 |
| Manufacturer | FEHRI |
| Working width | 1,400 mm |
| Overall width | 1,850 mm |
| Weight | ~650 kg |
| Required tractor power | from 40 HP (30 kW) |
| Maximum shredding diameter | up to Ø 20 cm |
| Hydraulic drive | |
| Motor type | Axial piston motor |
| Motor displacement | 60 cm³ |
| Required pump flow | 180 L/min |
| Working pressure | 300 bar |
| Required hydraulic connections | 1x single-acting with detent, 1x pressureless return, 1x pressureless drain return |
| Hydraulic hoses | Not included |
| Internal transmission | |
| Transmission type | 3 trapezoidal belts 17x1075 |
| Upper belt pulley | 180x2, bore Ø 30 mm |
| Lower belt pulley | 180x2, bore Ø 40 mm |
| Rotor | |
| Rotor diameter | Ø 193 x 6.3 mm |
| Bearing type | Pendulum ball bearings Ø 60 mm |
| Bearing position | External |
| Number of bearings | 208 |
| Blades | |
| Blade type | FEHRI 40 – hard metal carbide |
| Blade diameter | Ø 27 mm |
| Blade reuse | Up to 3 times |
| Mounting | |
| Tractor attachment | Cat. I and Cat. II |
| Mounting position | Front or rear |
| Mounting flap | Hydraulic |
| Support stand | Yes |
| Protection | Rear guard chains + ground skids + belt guard deflector |